Your Location:Home >Paint&Ink Additives
MT 6900-20X Rheological Additive
1、Description
   MT 6900-20X is a modified paste polyamide thixotropic additive. In the paint, printing ink and coating to form a strong network structure, with excellent thixotropic property and good dispersion, providing excellent anti-sagging, anti-settling, thickening effect.
2、Typical Physical Data
Composition modified polyamide compounds
Appearance pale yellow soft wax
Effective Content 20%
Solvent xylene and alcohol
Density (g/cm3) 0.88g/cm3
3、Properties And Applications
   1、 Easy-to- disperse, can be incorporated into coatings system by simply mixing;
   2、 To improve the system’s stability, and thixotropic properties, suitable the anti-setting of glass powder, aluminum paste, pearl powder,and help aluminum powder, pearl powder flake to orient and enhance the flash effect; 
   3、 Good compatibility with resin, does not affect the glossy, and can increase of the hardness of paint film;
   4、 Need’t heat treatment to activation, can use in a wide range of temperature(25℃-60℃)
4、Applications 
  Applies to most of solvent-based or non-aqueous coating ,paint ink systems, such as toluene, xylene, butyl acetate, ethylene glycol butyl ether, ethanol, etc.It is mainly used in the following resin-based material of the primer, filler, and aluminum powder, pearl powder top coat
alkyd resin acrylic resin polyurethane asphalt/ epoxy
tar / asphalt chlorinated Rubber Epoxy resin unsaturated polyester
thermosetting melamine resin epoxy / polyamide resin acrylic / polyurethane
5、Levels Of Use And Incorporation
  Levels of use: 1.0-5.0% total system weight ( Detailed technical information, please request to our sales staff) 
  Incorporation: In high-speed dispersion, the temperature is optimally controlled at below 60 ℃, stirring time of less than 30 minutes.
  The best way is: make pre-dispersed slurry then disperse the MT 6900-20X with limited shear in a short period of time.
   1 Direct incorporation: Add resins, solvents and MT 6900-20X,pre-mix directly, high-speed disperse 5 minutes, the temperature at 30 ℃ -60 ℃, and then add the other components.
   2 Master batch preparation: A master batch may be prepared by dispersing the paste in a vehicle and/or solvent which can be addedto the finished paint.
   Master batch formula: 6900-20X(20%) solvent(40%) resin(40%)
   Master batch process:
   1)Put the above materials into vehicle
   2)Pre-mixing at speed of 1000-1500 r / min until for 2-3min until uniformly
   3)Then mixing 15-30 minutes at speed of 2000-3000 r / min, temperature at below 60 ℃. In order to avoid the accumulation of air in the slurry , mixing blades should be moved up and down.
六、Compatible Brand
  MT 6900-20X is fully compatible with the following brands :
  Deuchem 229 solvent thickening, anti-setting agents
  THIXATROL P200X
  Kusumoto Disparlon6900-20X
  Korea SG 1003-20X、6900 sep 
7、Storage and Operation
   1、 Products stored in a cool well-ventilated place, away from heat and fire;
   2、 Products containing solvents, avoid direct contact with skin and eyes.
八、Package
  Iron bucket, net weight 16 kg

  Note: All data including the formula are true. However, we strongly recommend that customers should test in their own laboratory or equipments to confirm, Meitexiang guarante to be the holder of MT series additive formulations patent. The customers must comply with local laws and regulations of the patent.
  
Copyright:Taiyuan Meitexiang Technology Co., Ltd  Address:Changzhi Road 233,National High-tech Industrial Development Zone,Taiyuan,Shanxi  
Tel:+86-0351-7029968 Fax:(0351)7020207 Manager Chen:(0)13934545151 Manager Ji:(0)13466829184 E-mail:聚富彩票网注册 晋ICP备09010004号
一波中特群 一肖中特 下期必出两码中特 香港赛马会排位表1 曾道人生肖卡排期表 002二肖中特 五味斋心水论坛 香港六合彩透码部 一码中平特公开料 四肖中特 香港两码中特 特码2019年67期 曾道人一肖中特平 香港六和彩今晚开特码 风铃财富一尾中特平